Components · Dimensions

Tile and holder in numbers

All dimensions come straight from the 3D print files of the current set. Use them to check what fits where, build your own holder or design special tiles.

Same body for numbers, jokers and special tiles

The tile

Technical drawing of the tile: top view 25 × 25 mm showing the number 12, side view 3 mm thick.
Top and side view, dimensions in millimetres.
  • Size25 × 25 mm
  • Thickness3 mm
  • Corner radiusapprox. 3.2 mm
  • Digit height10.1–10.6 mm
  • Digitscolour inlay, full depth
  • 6 and 9with a dot, ⌀ 1.85 mm

Jokers and special tiles share the same body. Instead of a number, the joker shows four triangles (11.7 × 6.7 mm each) in two colours. Special tiles carry a symbol of up to 15 × 15.5 mm, inlaid 0.6 to 0.75 mm deep.

Tile data sheet (PDF, 182 KB)

The tile holder

One holder takes 28 tiles: four rows of seven. Each step has a 25.5 mm back rest and a 5 mm deep ledge. The tiles lean back by 20°, so every row stays readable from the front.

  • Length175 mm
  • Height92.3 mm
  • Depth with legs60.1 mm
  • Rows4 × 7 tiles
  • Tile angle20°
  • Legs2 × 48.9 mm, 10 mm thick
Technical drawing of the tile holder from the side: four steps with tiles, 92.3 mm high, 60.1 mm deep with legs, tiles tilted by 20°.
Side profile in section. The legs slide into a groove at the back bottom.
Technical drawing of the tile holder from the front: 175 mm wide, 92.3 mm high, four rows of seven tiles.
Front view with all 28 places.

Printed in Bremen

Every part comes off a 3D printer. The tiles are printed face down, with the digits as a second colour in the same print. Small marks are part of it and make every set unique.

  • PrinterBambu Lab A1 mini
  • Nozzle0.4 mm
  • Layer height0.2 mm
  • MaterialPLA
Print it yourself

nummix from your own 3D printer

All print files for the rack and the tiles are free on Bambu Lab’s MakerWorld – for reprints, replacements and tinkering.

  1. Downloadfree files from MakerWorld
  2. Printtiles and rack, layer by layer
  3. Playthe rules are here

Print files on MakerWorld (external link) coming soon to MakerWorld

Licence: CC BY-NC-SA 4.0 (external link) – reprinting and remixing explicitly welcome, credit “nummix”, not for sale, changes under the same licence. The nummix® trademark is protected independently.

The set for real

Rulebook, blank tiles before printing and the packaging a set travels in.

Cover of the rulebook with logo and the number range as a grid
Blank white tiles and the rulebook – this is how every tile starts
The set packaging: a box with a round nummix sticker, a mug next to it
Set with box, rulebook, mug and lots of nummix buttons
The nummix rulebook on the table, tiles behind it
Game table with many laid rows, the rulebook in front

Your own holder or tile?

Building a holder, a box or a special tile? Tell us about it, we are happy to show good ideas here.

Licence CC BY-NC-SA 4.0 (external link): reprinting and remixing welcome, with credit, not for sale. The complete set to print yourself is on MakerWorld (external link).

Write to us

info@nummix.de
Send an idea To the rules
Back to top